If you are just visiting and found the information you were looking for please contribute to the running costs by making a donation.	Forums : : Register : : Log In : : Log Out : : Help : : Calendar : : Search
	My Setup : : Member List : : Contact Admin : : Today's Posts

All Forums >> [Bottle Forums] >> Cleaning and Repairing >> COLORING AND POLISHING RESIN

Page: [1]

Login Message << Older Topic   Newer Topic >>

COLORING AND POLISHING RESIN - 3/28/2006 11:55:08 PM    welddigger   Posts: 511 Joined: 4/24/2004 From: Hereford,PA. Status: offline I JUST BOUGHT CASTING RESIN AND THE CATYLYST. JUST WANT TO ASK WHAT IS THE BEST THING TO USE FOR COLORING THE RESIN,INK MAYBE OR DYES? ALSO ONCE IT IS SET AND HARDENED CAN YOU OR HOW DO YOU SAND AND POLISH THE FIXED AREA? THANXS LOVE THIS FORUM Post #: 1

RE: COLORING AND POLISHING RESIN - 3/29/2006 7:04:29 AM    Bottle tumbler   Posts: 370 Joined: 4/5/2004 From: Noxen pa Status: offline If you go on of the bigger crafts stores you will find dyes there for coloring, color your resin first before you add the catylyst. wait at least 24 hours before you sand it with sand paper to shape it. when you have it where you want it, make a little bit of resin up and just recoat it with a fine layer, dont forget to add the catylyst, if you make a mistake, use acetone and soak the spot over night in the acetone and it will be gone in the morning or sooner. then you can redue the spot if you want. rick kern (in reply to welddigger) Post #: 2

All Forums >> [Bottle Forums] >> Cleaning and Repairing >> COLORING AND POLISHING RESIN

Page: [1]

New Messages No New Messages Hot Topic w/ New Messages Hot Topic w/o New Messages Locked w/ New Messages Locked w/o New Messages

Post New Thread  Reply to Message  Post New Poll  Submit Vote  Delete My Own Post  Delete My Own Thread  Rate Posts