ConsDigginVids
Posts: 342
Joined: 7/18/2010 From: ConsDigginVids@gmail.com Status: offline
|
I made this today, for a few of my insulators... I took a 4 X 4 board and drilled three 1 inch holes on the board, and spaced them out every 5 3/8 inch. I got some 1 inch wood pegs and placed them in the hole. and then stained the pegs with a red oak finish... I tried to give it a realistic look just as if they were on the telephone pole... Wanted: Franklin, Fulton, Huntingdon, and Bedford County Bottles (Pennsylvania)
Attachment (1)
|