druggistnut
Posts: 1150
Joined: 1/7/2006 From: Otisville, Michigan Status: offline
|
You can get the stoppers, to replace the one in the bottle, if you desire. Get a tupperware container about 3-4 times larger than the bottle. Mix a 50/50% solution of Muriatic acid and water (pour the acid in to the water, not the opposite), enough to fill and cover the hutch. Leave it for a week, covered but able to vent. This should be done in a garage or outdoors, if weather permits. When you get it out of the bath, wear surgical/rubber gloves, unless you like to feel the burn. You should be able to remove the metal piece now, if it hasn't disappeared. Rinse the bottle in a baking soda/water solution and then rinse with water. I use plastic coat hangers that I have cut to shape, to root around in bottles. They don't damage the glass and if you leave a small curve on the end, it can dislodge things that are wedged. Good luck. Bill
< Message edited by druggistnut -- 2/20/2011 6:56:30 PM >
_____________________________
Michigan drugstore bottles/dose glasses, jugs, etc... Any paper from Mich drugstores, pre 1900. Michigan hutches. Anything unusual from Michigan, i.e., paper from bottlers, etc... Buy or trade President-Flint, Michigan FOHBC Club
|