Antique-Bottles.Net logo
If you are just visiting and found the information you were looking for please contribute to the running costs by making a donation.
Forums : : Register : : Log In : : Log Out : : Help : : Calendar : : Search


White film

 
View related threads: (in this forum | in all forums)

Logged in as: Guest
Users viewing this topic: none
 
All Forums >> [Bottle Forums] >> Cleaning and Repairing >> White film Page: [1]
Login
Message << Older Topic   Newer Topic >>
White film - 4/8/2005 10:02:22 AM   
TomsNutt

 

Posts: 25
Joined: 4/6/2005
From: Athens, GA
Status: offline
I have some glass with a filmy light white layer on parts or thoughout certain bottles. I have tried cleaning but not had any luck. Will Bar Keeper's Friend work for this type of application. Or does anybody have another type solution?
Post #: 1
RE: White film - 4/8/2005 10:35:11 AM   
digdug


Posts: 606
Joined: 11/4/2004
From: Atlanta
Status: offline
What type of glass/bottle is it? I have used Oxyclean on No Deposit No Return bottles and it eats off all kinds of crud and deposits. BUT DO NOT USE oxyclean on older bottles. I would say anything from the 1960's and up is OK, but no ACl's either. I found out the hard way what it will do. The Oxyclean releases oxygen in water and bubbles up. If it is an older bottle with small pits, etc. it gets in those pits and causes them to become big pits and chips. ACL it tends to remove some of it. But bar keepers Friend works well, but Oxyclean "does the work so you won't have to" on NDNR. Not much scrubing involved on the NDNR soda bottle. It eats off all the gunk.

(in reply to TomsNutt)
Post #: 2
RE: White film - 4/8/2005 12:13:17 PM   
TomsNutt

 

Posts: 25
Joined: 4/6/2005
From: Athens, GA
Status: offline
Thanks digdug. These are jars and bottles I have from 40's through 60's. Some have ACL labels and some do not. Would it be safe to use on the inside and not near the ACL? How about silcone grease? I was reading about it in another post.

(in reply to TomsNutt)
Post #: 3
RE: White film - 4/8/2005 12:16:56 PM   
digdug


Posts: 606
Joined: 11/4/2004
From: Atlanta
Status: offline
I have used oxyclean on the inside of ACL's and had good luck. I did try the Bar Keepers Friend on an ACL, inside and out and it did a wonderful job! Also-I have used a hand soap for garderners with HOT water (Found it Home Depot). It was made to remove tree sap off of hands. Does wonders on dried up soda in bottles. Gets syrup goo right out.
I have never used silicone grease, but have seen bottles coated in it. It doesn't remove the white film, it just covers it up, makes bottle look wet. I don't care for it myself. Greasy, slippery mess. You leave it on the bottle. Does show nicely though once coated.

< Message edited by digdug -- 4/8/2005 12:15:52 PM >

(in reply to TomsNutt)
Post #: 4
RE: White film - 4/8/2005 12:24:57 PM   
TomsNutt

 

Posts: 25
Joined: 4/6/2005
From: Athens, GA
Status: offline
I am willing to try anything. 2 of my favorites are of a Gordon's and Tom's Jar. The others are on ACL's and No Deposits. I sure would like to get them nice and sparkling like some of the pics I have seen. I am a bit of a neat freak when it comes to glass on display. It looks so much better if it is clean. Do you know where to find a good scrubbing brush for inside soda bottles? I can not find one long enough. Baby bottle scrubbers are all too short.

(in reply to TomsNutt)
Post #: 5
RE: White film - 4/8/2005 12:31:23 PM   
digdug


Posts: 606
Joined: 11/4/2004
From: Atlanta
Status: offline
I bought some years ago in a magazine that were great. They are plastic scrub brush with tough cotton fibers on the end for cleaning the corners. I need some new ones myself. Let me check a catalog at home. It is for gardening, but they have the vase brush packs available. Different lengths, etc. They look good.

< Message edited by digdug -- 4/8/2005 1:45:30 PM >

(in reply to TomsNutt)
Post #: 6
RE: White film - 4/8/2005 2:10:46 PM   
digdug


Posts: 606
Joined: 11/4/2004
From: Atlanta
Status: offline
Found the brushes at Lee Valley (www.leevalley.com) Link is: http://www.leevalley.com/garden/page.aspx?c=2&p=10209&cat=2,50560
Great brushes! Lasted a long time.




Attachment (1)

< Message edited by digdug -- 4/8/2005 2:08:11 PM >

(in reply to TomsNutt)
Post #: 7
RE: White film - 4/8/2005 3:37:20 PM   
TomsNutt

 

Posts: 25
Joined: 4/6/2005
From: Athens, GA
Status: offline
Wow those look perfect. I just ordered 2 sets and cannot wait to use them. What is your recommandation for inside soda bottles with film using these brushes?

(in reply to TomsNutt)
Post #: 8
RE: White film - 4/8/2005 3:43:54 PM   
digdug


Posts: 606
Joined: 11/4/2004
From: Atlanta
Status: offline
I have used a little bit of everything with the brushes. Oxyclean, Bar Keeper, etc. If you do use Oxyclean-go by the directions! And rinse bottle well after using it with hot soapy water. I've just started using the Bar Keeper. But, I hadn't had a chance to use it on a frosted bottle.

(in reply to TomsNutt)
Post #: 9
RE: White film - 4/21/2005 9:31:26 PM   
Bottleneck

 

Posts: 10
Joined: 3/24/2005
Status: offline
Will the oxyclean work for rust stains too? I have some old fruit jars that used to have metal rings on them for handles. They have since been removed because of bad rust and left a ring of rust around the neck of the jars. I tried soaking them and using mild liquid soap, but have been reluctant to use strong cleaning agents, thinking they may ruin the glass. Who sells "oxyclean"?

(in reply to TomsNutt)
Post #: 10
RE: White film - 4/21/2005 11:17:38 PM   
tazmainiendigger


Posts: 970
Joined: 11/21/2003
From: State O Maine
Status: offline
Hi Tom, Try Iron Out... it is available at walmart... mix the powder in lukewarm water and soak the glass. It works great on rust and is "safe" Taz

(in reply to TomsNutt)
Post #: 11
RE: White film - 4/22/2005 6:57:49 AM   
digdug


Posts: 606
Joined: 11/4/2004
From: Atlanta
Status: offline
Bar Keepers Friend also works good on rust stains. Mix it like a paste and scrub it with a good sponge. You can also find it at Wal-Mart and most grocery stores carry it too.
Oxyclean is good for dirt stains, etc. But not so much rust stains. You can find Oxyclean at grocery stores, Target, Wal-mart, you should find it on the laundry soap aisle. It comes in a powder form.

< Message edited by digdug -- 4/22/2005 6:56:55 AM >

(in reply to TomsNutt)
Post #: 12
RE: White film - 4/23/2005 12:55:19 AM   
whiskeyman


Posts: 2012
Joined: 4/17/2005
From: NE TENN-SW VA
Status: offline
Lime Away is good at removing rust and calcium deposits...fill the bottle full and let it stand about 10 to 15 minutes...longer for tougher rust stains...Pour it back into the original container and reuse over & over again...Rinse the bottle well as the Lime Away is quite foamy....wear rubber gloves and keep your eyes protected....it will sting/burn. I've used it for years with no problems. It's available at any grocery store in the household cleaners section. Won't harm the outside of old bottles either...I'd keep it off any ACL bottles though just to be safe.
Bar Keepers Helper is prefect for cleaning ACL bottles...doesn't abrade the paint and removes stubborn dirt & stains.

(in reply to TomsNutt)
Post #: 13
Page:   [1]
All Forums >> [Bottle Forums] >> Cleaning and Repairing >> White film Page: [1]
Jump to:





New Messages No New Messages
Hot Topic w/ New Messages Hot Topic w/o New Messages
Locked w/ New Messages Locked w/o New Messages
 Post New Thread
 Reply to Message
 Post New Poll
 Submit Vote
 Delete My Own Post
 Delete My Own Thread
 Rate Posts


Antique Bottles

Forum Software © ASPPlayground.NET Advanced Edition 2.4.5 ANSI

0.164