If you are just visiting and found the information you were looking for please contribute to the running costs by making a donation.	Forums : : Register : : Log In : : Log Out : : Help : : Calendar : : Search
	My Setup : : Member List : : Contact Admin : : Today's Posts

All Forums >> [Bottle Forums] >> Displaying and Photographing >> RE: repaired bottles

Page: <<   < prev  1 [2]

Login Message << Older Topic   Newer Topic >>

RE: repaired bottles - 1/15/2005 2:57:14 AM    S.C. Warner   Posts: 126 Joined: 1/2/2005 From: it happens out in Vegas, and it happens in Moline. Status: offline quote: ORIGINAL: BRIAN S.Hey SC !Here's a link to an ebay auction of a Labeled Walker's V.B. if you would like to see what the label looked like. ttp://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=890&item=6146077813&rd=1 Brian Hi Brian! Thanks much for the link! (Gee, they sure didn't want it to get away did they?That bottle was wrapped up from head to toe!) I never would have guessed it's look and what the "V.B." designated, there is a lot of good help here, Thank-You (Sorry it took so long to get back to this post, I've been the lazy grasshopper that fiddled all summer while the ants prepared for winter! Hope you are in a warm place! s.c. (in reply to BRIAN S.) Post #: 21

RE: repaired bottles - 1/16/2005 7:13:56 PM    baltbottles   Posts: 930 Joined: 11/25/2002 From: Baltimore Maryland Status: offline Hey heres a pic of a blue cole ten pin soda that was missing nost of the neck and all of the lip when i dug it. I used colored resin to rebuild the missing parts. It was a tough job but i'm pleased with the results. i took a picture of it next to a mint cole ten pin from my collection. The bottle on the right is the repaired example. Chris Attachment (1) _____________________________ Please visit my website at : www.geocities.com/baltbottles/index.html (in reply to S.C. Warner) Post #: 22

RE: repaired bottles - 1/19/2005 10:46:52 AM    bearswede Posts: 2910 Joined: 9/28/2004 From: western mass Status: offline That's a GREAT job, Chris!!! What did you use as a mold, or was it all done free-hand? Ron (in reply to S.C. Warner) Post #: 23

RE: repaired bottles - 2/8/2005 2:00:02 PM    Bottleman Posts: 851 Joined: 9/3/2004 From: Central Pennsylvania Status: offline This is to bearswede… I just went out and bought the casting resin that you were talking about and am excited to try it out on some bottle. I am going to start with a common aqua Philadelphia squat I have here. Before I just start mixing colors I wanted to ask you what to mix to get a aqua color, like the color of your Shaker Extract Valarian. I would guess to add just a bit of blue but how did you get yours? Thanks, Tom (in reply to bearswede) Post #: 24

RE: repaired bottles - 2/8/2005 5:05:45 PM    bearswede Posts: 2910 Joined: 9/28/2004 From: western mass Status: offline Hey, Tom... It's been awhile since I did the aqua, but I think I added one to three drops of blue and then maybe a drop of yellow... Play around with it using small amounts of resin until your color matches the bottle... Let us know how it works out w/pics... Ron (in reply to S.C. Warner) Post #: 25

RE: repaired bottles - 2/21/2005 4:57:17 PM    bearswede Posts: 2910 Joined: 9/28/2004 From: western mass Status: offline Hey, S.C. There's a Walker's V.B. for auction on American Bottle Auctions...Presently at $30... Ends tomorrow night... Attachment (1) (in reply to S.C. Warner) Post #: 26

RE: repaired bottles - 2/22/2005 1:13:48 AM    Bottleman Posts: 851 Joined: 9/3/2004 From: Central Pennsylvania Status: offline Hi bearswede. That’s a really nice bottle that’s up for auction! I recently bought that casting resin and tried it out for the first time last week on a damaged medicine. I let it sit over night and in the morning I took the mold that I formed around it and when I touched it, it was still a bit soft. I could have let it sit longer but it didn’t fill the hole chip so I just took it all off while I still could. How long does it usually take to set? Hours? Days? Maybe I got the mixture wrong. ~~Tom (in reply to S.C. Warner) Post #: 27

RE: repaired bottles - 2/22/2005 10:40:14 AM    bearswede Posts: 2910 Joined: 9/28/2004 From: western mass Status: offline Tom... Days... You really need to be patient...believe me, I know... I'm always getting my little paw prints all over my repairs...and having to do them all over again... patience, patience, patience... Ron (in reply to S.C. Warner) Post #: 28

RE: repaired bottles - 3/11/2005 1:37:33 AM    Bottleman Posts: 851 Joined: 9/3/2004 From: Central Pennsylvania Status: offline Hi bearswede, as I told you before I bought the casting resin and I have tried it out a few times now with no luck. After it dries I will give it a little tug and the repair will come right off. It just doesn’t want to stick the glass. Have you ever had this problem before? Well, maybe its just because I used it to fill in flake chips on the sides of bottles and not chips where it could attach very well to sharp corners. ~~Tom (in reply to bearswede) Post #: 29

RE: repaired bottles - 3/11/2005 9:31:32 PM    bearswede Posts: 2910 Joined: 9/28/2004 From: western mass Status: offline Actually Tom, I've not had that problem... Did you follow the directions for adding the hardening drops? (in reply to S.C. Warner) Post #: 30

RE: repaired bottles - 3/14/2005 1:08:51 AM    Bottleman Posts: 851 Joined: 9/3/2004 From: Central Pennsylvania Status: offline What hardening drops? Just kidding…. Yes though, I followed the directions and added the right number of drops for the amount of resin I was working with. Well, it’s all about trial and error so I will keep on doing this till I get it right. If it ever works out I will be sure to give you some pictures. ~~Tom (in reply to S.C. Warner) Post #: 31

All Forums >> [Bottle Forums] >> Displaying and Photographing >> RE: repaired bottles

Page: <<   < prev  1 [2]

New Messages No New Messages Hot Topic w/ New Messages Hot Topic w/o New Messages Locked w/ New Messages Locked w/o New Messages

Post New Thread  Reply to Message  Post New Poll  Submit Vote  Delete My Own Post  Delete My Own Thread  Rate Posts