Mid-1800s Fabric and Wall Paper!

Welcome to our Antique Bottle community

Be a part of something great, join today!

yacorie

Well-Known Member
Joined
Dec 10, 2018
Messages
632
Reaction score
381
Points
63
Location
CT
Looks like two baby vultures.

For the fabric - is there anyway you could use a sawZ-all and cut out a piece of the wall without pulling anything apart? If so, then maybe you could slowly remove layers or at least have time to get more feedback on how to preserve it....I think that’s what I would do
 

Robby Raccoon

Trash Digger
Joined
Jun 14, 2014
Messages
4,318
Reaction score
225
Points
63
Location
Locō movērī
For the fabric - is there anyway you could use a sawZ-all and cut out a piece of the wall without pulling anything apart? If so, then maybe you could slowly remove layers or at least have time to get more feedback on how to preserve it....I think that’s what I would do

The problem is the walls are all structural. There is no framework. The walls attach to beams and are themselves what keeps the house standing. I can get most stuff out. I'm just having a difficulty time preserving the fabric. Lol
 

Robby Raccoon

Trash Digger
Joined
Jun 14, 2014
Messages
4,318
Reaction score
225
Points
63
Location
Locō movērī
I'm not talking about the painted skull, I'm talking about the 2 live living monter's at bottom of Pic, do you see them? I can tell you they made a loud horrible screetching sound, scare the hell out of you. You'd hear them before you seen them.
Go over and pet them. :p
 

Huntindog

Well-Known Member
Joined
Aug 14, 2012
Messages
170
Reaction score
90
Points
28
Maybe try starching a patch and see if that holds it together long enough to get it mounted.
 

Robby Raccoon

Trash Digger
Joined
Jun 14, 2014
Messages
4,318
Reaction score
225
Points
63
Location
Locō movērī
Maybe try starching a patch and see if that holds it together long enough to get it mounted.
What do you mean by starching patch? Will starch bind it long enough to do sumthin like sewing a strip around the fibers like a frame to try and keep them together?
 

MaineMtnDigger

Well-Known Member
Joined
Oct 14, 2009
Messages
146
Reaction score
37
Points
28
Location
Woodstock, ME.
As we tear open the walls and rip down the plaster put up starting in the 1870s, we keep finding fabric shoved in the walls-- used as chinking in the cabin-- and behind the wall paper (with a penned in date of February 1862 on one seam) which is itself behind 1860s and 1870s newspapers and journals/magazines used as further insulation before they began plastering. So it was used to both join pieces of wall paper and to fill in gaps in the walls and floors.
But its one problem is, most of it is too fragile to even get a picture of before it unravels. This is the best sample I have of this variety. But I can't even open it up fully. If I try, it will end up like the prior sample I had pulled out-- unraveling to where the designs disappear. Is there anything that can be done to keep it from unraveling so I can open it up and frame it?
View attachment 210797
Since the fabric is behind 1860s wall paper, 1870s plaster, and 1920s siding, we know it must be very old (as it's sandwiched between very old layers and was stretched over some of the gaps behind the wall paper).
View attachment 210798
Here's two types of wall paper from the 19th century. Behind one layer is still yet another layer. On the seam shown was the 1862 date. Thus, that there is an entire wall of other paper papered over with this suggests the other paper is even older.
View attachment 210799
The journals and such put up before the plaster helped preserve the wall paper.
View attachment 210800
Here is the oldest layer of wall paper. The entire stairway is lined with this on one wall. The stairs aren't original. Originally it was just a ladder to a loft, so at some point this was a room in the center of the house where the fireplace was. The construction of the house is more like that of a barn. Vertical planks up to 20 feet tall (and over 2 inches thick and over 2 feet wide at times) are nailed into beams of large timbers. There are no 2x4's. It's a primitive plank construction 3/4 Cape Cod. As such, no bottles in the walls because there is no frame to set them on. Hah hah.
Can you post a photo of the house from the outside? I'm just curious as to what it looks like.
 

Robby Raccoon

Trash Digger
Joined
Jun 14, 2014
Messages
4,318
Reaction score
225
Points
63
Location
Locō movērī
Can you post a photo of the house from the outside? I'm just curious as to what it looks like.
Right now, it looks terrible. :p We've stripped back up to four layers of siding in some places. Chimney not finished in pic. Original exterior exposed after being covered since between 1925 and 1928 due to what I found behind the siding.
IMG_20200821_122043_061.jpg
 

Latest threads

Forum statistics

Threads
83,366
Messages
743,850
Members
24,386
Latest member
kylese
Top