A few questions on this one. I dug this bottle in a dump that I think dated back to about 1900. Unfortunately it was in two pieces about 2 feet apart. Found the top first and with dirt on it I thought it was a hock wine top and set it to the side. A short time later I found the bottom and then realized they matched.
The seam runs around the base and up and ends at the base of the neck.
One of the pictures shows the color with sunlight behind it. Anything you can tell me about this bottle and what type of glue or epoxy I should use would be greatly appreciated...
Thank you, Roy
The seam runs around the base and up and ends at the base of the neck.
One of the pictures shows the color with sunlight behind it. Anything you can tell me about this bottle and what type of glue or epoxy I should use would be greatly appreciated...
Thank you, Roy
Attachments
-
20220511_123358.jpg237.5 KB · Views: 105
-
20220511_123553.jpg303.1 KB · Views: 104
-
20220515_154501.jpg283.1 KB · Views: 96
-
20220516_090013.jpg279.7 KB · Views: 101
-
20220530_184453.jpg276.5 KB · Views: 110
-
20220530_183637.jpg294.8 KB · Views: 99
-
20220530_183603.jpg293.1 KB · Views: 97
-
20220515_154707.jpg423.8 KB · Views: 101
-
20220511_123715.jpg240.3 KB · Views: 104
-
20220511_123412.jpg251.8 KB · Views: 102